Table of Contents
Advertisement
Table 4. Config menu items (continued)
Menu item
Power
Beep and Alarm
Serial ATA (SATA)
Date/Time menu
If you need to set the current date and time of your computer, select Date/Time from the ThinkPad Setup
program main menu. The following submenu is displayed:
• System Date
• System Time
To change the date and time, do the following:
1. Using the up and down arrow keys, select the item to change the date or time.
2. Press Tab, Shift+Tab, or Enter to select a field.
3. Type the date or time.
Notes: Another way to adjust the date and time is pressing the following keys:
98
User Guide
Submenu item
CPU Power Management
PCI Express Power
management
Password Beep
Keyboard Beep
SATA Controller Mode
Option
Selection
• Disabled
• Enabled
• Disabled
• Enabled
• Disabled
• Enabled
• Disabled
• Enabled
• Compatibility
• AHCI
Comments
Graphics mode if the
operating system supports
this feature, and to
Integrated Graphics mode if
the operating system does
not support this feature.
Unless this power-saving
feature is disabled, it
stops the processor clock
automatically when there
is no system activity. You
usually do not need to
change this function.
Enables or disables a
feature that automatically
adjusts power management
when there is no PCI
Express activity. You
usually do not need to
change this function.
Enable this option to have
a beep sound when the
system is waiting for a
power-on, hard disk, or
supervisor password.
Different beeps will sound
when the entered password
matches or does not match
the configured password.
Enables or disables the
keyboard beep when
unmanageable key
combinations are pressed.
Selects SATA controller
operation mode. If you
select Compatibility mode,
SATA controller operates in
compatibility mode.
Advertisement
Table of Contents
