Table of Contents
Advertisement
Table 4. Config menu items
Menu item
Network
96
User Guide
Submenu item
Wake On LAN
Ethernet LAN Option ROM
(for UEFI Only boot mode
or Both with UEFI first)
Wireless LAN Radio
UEFI IPv4 Network Stack
(for UEFI Only boot mode
or Both with UEFI first)
UEFI IPv6 Network Stack
(for UEFI Only boot mode
or Both with UEFI first)
UEFI PXE Boot Priority
(for Both with UEFI first
boot mode, and IPv6
and IPv4 stacks are both
enabled.)
Selection
• Disabled
• AC Only
• AC and Battery
• Disabled
• Enabled
• On
• Off
• Disabled
• Enabled
• Disabled
• Enabled
• IPv6 First
• IPv4 First
Comments
Enable the system to power
on when the Ethernet
controller receives a magic
packet.
If you select AC Only, the
Wake on LAN function is
enabled only when the ac
power adapter is attached.
If you select AC and
Battery, the Wake on LAN
function is enabled with any
power sources.
Note: The magic packet
type Wake on LAN requires
ac power.
Note: The Wake on LAN
function does not work
when a hard disk password
is set.
Loads the Ethernet LAN
Option ROM to enable
startup from an integrated
network device.
If you select On, the internal
wireless radio is turned on.
If you select Off, the internal
wireless radio is turned off.
Enable or disable Internet
Protocol Version 4 (IPv4)
network stack for the UEFI
environment.
Enable or disable IPv6
(Internet Protocol Version
6) network stack for UEFI
environment.
Select network stack
priority for UEFI PXE boot.
Advertisement
Table of Contents
