Table of Contents
Advertisement
not true: If you remove the hard disk drive from a computer with a dual-core processor and install it on a
computer with a single-core processor, you cannot get access to the hard disk drive.
Installing the Windows 8 operating system
Before you start, print these instructions.
To install the Windows 8 operating system and its related software on your computer, do the following:
1. Start ThinkPad Setup.
2. Select Startup ➙ Boot.
3. Change the boot priority order to boot your computer from the drive that contains the Windows
8 operating system installer.
4. Press Fn+F10.
5. Connect the drive that contains the Windows 8 operating system installer to your computer, and
restart the computer.
6. Install the device drivers for Windows 8 operating system. See "Installing device drivers" on page 93.
Installing the Windows 8 fix module
To download and install a Windows 8 fix module, go to the Microsoft Knowledge Base homepage at
http://support.microsoft.com/, type the number of the fix module you need in the search field, and click
Search.
Installing device drivers
The device drivers are available at
http://www.lenovo.com/Drivers. Click your computer product name to view all the device drivers for your
computer.
Attention: Always go to http://www.lenovo.com/Drivers for the latest device drivers. Do not download
them from the Windows Update Web site.
Installing the driver for the 4-in-1 media card reader
To use the 4-in-1 media card reader, you need to download and install the Realtek Card Reader Driver. Go to
http://www.lenovo.com/Drivers.
Installing the driver for USB 3.0 on the Windows 7 operating system
If your computer supports USB 3.0, and you have reinstalled the operating system, you need to download
and install the USB 3.0 driver to use the USB 3.0 by doing the following:
1. Go to http://www.lenovo.com/support. Find your model and display the driver links.
2. Select the USB 3.0 driver for the 32-bit or 64-bit operating system and extract it to your local hard
disk drive.
3. Double-click the Setup.exe file in the C:\DRIVERS\WIN\USB3.0\ directory.
4. Click Next. If the device driver is already installed, click Cancel. Follow the instructions on the screen
until the installation is finished.
Installing the ThinkPad monitor file for Windows 2000/XP/Vista/7 on
the Windows 7 operating system
The ThinkPad monitor file for Windows 2000/XP/Vista/7 is in the following directory:
C:\SWTOOLS\DRIVERS\MONITOR
.
Chapter 7
Advanced configuration
93
Advertisement
Table of Contents
