Honda 00X31-TK6-6100 Owner's Manual page 313

Checking and Replacing Fuses
If something electrical in your
vehicle stops working, check for a
blown fuse first. Determine from the
chart on pages 309 and 310, or the
diagram on the fuse label, which fuse
or fuses control that device. Check
those fuses first, but check all the
fuses before deciding that a blown
fuse is the cause. Replace any blown
fuses, and check if the device works.
1. Turn the ignition switch to the
LOCK (0) position. Make sure the
headlights and all other
accessories are off.
2. On the under-hood fuse box,
remove the cover from the fuse
box. On the interior fuse box, pull
the fuse lid toward you.
FUSE
BLOWN
3. Check each of the large fuses in
the under-hood fuse box and the
interior fuse box by looking
through the top at the wire inside.
FUSE PULLER
4. Check all smaller fuses in the
interior fuse box by pulling out
each one with the fuse puller
provided in the interior fuse box.
CONTINUED
Fuses
307