Brake And Clutch Fluid - Honda 00X31-TK6-6100 Owner's Manual

Honda 2010 fit automobile owner's manual
Table of Contents

Advertisement

Check the brake fluid level in the
reservoirs monthly.
There are up to two reservoirs,
depending on the model. They are:
Brake fluid reservoir (all models)
Clutch fluid reservoir
(manual transmission models
only)
Replace the brake fluid according to
the time recommendation in the
maintenance minder schedule.
Always use Honda Heavy Duty
Brake Fluid DOT 3. If it is not
available, you should use only DOT 3
or DOT 4 fluid, from a sealed
container, as a temporary
replacement.
Using any non-Honda brake fluid can
cause corrosion and decrease the life
of the system. Have the brake
system flushed and refilled with
Honda Heavy Duty Brake Fluid
DOT 3 as soon as possible.
Brake fluid marked DOT 5 is not
compatible with your vehicle's
braking system and can cause
extensive damage.

Brake and Clutch Fluid

Brake Fluid
MAX
MIN
The fluid level should be between
the MIN and MAX marks on the side
of the reservoir. If the level is at or
below the MIN mark, your brake
system needs attention. Have the
brake system inspected for leaks or
worn brake pads/shoes.
CONTINUED
261

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fit 2010

Table of Contents