Honda 00X31-TK6-6100 Owner's Manual page 143

Playing a USB Flash Memory Device (Models without navigation system)
To Play a USB Flash Memory
Device
This audio system can operate the
audio files on a USB flash memory
device with the same controls used
for the in-dash disc player. To play a
USB flash memory device, connect it
to the USB adapter cable in the
upper glove box, then press the AUX
button. The ignition switch must be
in the ACCESSORY (I) or ON (II)
position.
The audio system reads and plays
the audio files on the USB flash
memory device in MP3, WMA or
ꭧ
AAC formats. Depending on the
format, the display shows MP3,
WMA or AAC when a USB flash
memory device is playing. The USB
flash memory device limit is up to
700 folders or up to 65535 files.
ꭧ: Only AAC format files recorded
with iTunes are playable on this
audio unit.
The recommended USB flash
memory devices are 256 Mbyte or
higher, and formatted with the FAT
file system. Some digital audio
players may be compatible as well.
Some USB flash memory device
(such as devices with security
lockout features, etc.) will not work
in this audio unit.
NOTE:
Do not use a device such as a card
●
reader or hard drive as the device
or your files may be damaged.
Do not connect your USB flash
●
memory device using a HUB.
Do not use an extension cable to
●
the USB adapter cable equipped
with your vehicle.
Do not keep the USB flash
●
memory device in the vehicle.
Direct sunlight and high heat will
damage it.
We recommend backing up your
●
data before playing a USB flash
memory device.
Depending on the type and
●
number of files, it may take some
time before they begin to play.
Depending on the software the
●
files were made with, it may not be
possible to play some files, or
display some text data.
The specifications for compatible
MP3 files are:
– Sampling frequency:
32/44.1/48 kHz (MPEG1)
16/22.05/24 kHz (MPEG2)
– Bit rate:
32/40/48/56/64/80/96/112/128/
160/192/224/256/320/VBR kbps
(MPEG1)
8/16/24/32/40/48/56/64/80/96/
112/128/144/160/VBR kbps
(MPEG2)
CONTINUED
137