Honda 00X31-TK6-6100 Owner's Manual page 118

Honda 2010 fit automobile owner's manual
Table of Contents

Advertisement

Vents, Heating, and A/C
When you select
or
system automatically turns on the
A/C (if equipped). You cannot turn
the A/C off in this mode.
Ventilation
The flow-through ventilation system
draws in outside air, circulates it
through the interior, then discharges
it through vents near the tailgate.
1. Set the temperature to the lower
limit.
2. Make sure the A/C is off.
3. Select
and
.
4. Set the fan to the desired speed.
112
Using the Heater
, the
The heater uses engine coolant to
warm the air. If the engine is cold, it
will be several minutes before you
feel warm air coming from the
system.
1. Select
2. Set the fan to the desired speed.
3. Adjust the warmth of the air with
the temperature control dial.
and
.
Using the A/C
If equipped
Air conditioning places an extra load
on the engine. Check the high
temperature indicator (see page 63).
If the indicator begins to blink, turn
off the A/C until the indicator goes
off.
1. Turn on the A/C by pressing the
button. The indicator in the button
comes on when a fan speed is
selected.
2. Make sure the temperature is set
to maximum cool.
3. Select
.
4. If the outside air is humid, select
recirculation mode. If the outside
air is dry, select
.
5. Set the fan to the desired speed.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fit 2010

Table of Contents