Table of Contents
Advertisement
SW-DVI-2A/4A User's Manual
3.0 Installation
1. Your package includes the Splitter box, a power supply and this Manual
(the 4 port Splitter also includes rack-mount kit). You need to purchase an
input cable for connection to your video source and possible output
extension cables to go to your monitors. Hall Research sells high quality
DVI cables and adapters at various lengths.
2. Make sure the PC, the Splitter, and the monitors are all turned off
3. Plug the monitor's cables into the DVI OUT ports of the Splitter (Note that
at least one monitor needs to be connected to the output 1 of the Splitter)
4. Plug a male-to-male extension cable from PC's DVI port to the Splitter
5. Plug the supplied power adapter to the unit (The green LED on the front
panel turns on)
6. Turn on the monitors.
7. Turn on the PC.
4.0 Cascade Operation
For more outputs you can connect output #1 of the Splitter to the input of a
Slave Splitter. It is recommended to keep cascading to only 2-levels deep.
2
Advertisement
Table of Contents
