All-in-one console extender dual video, amplified or line-level audio, rs-232, and 3 separate usb extensions: two direct plus one with 4-port hub to 150 meters (500 ft) (20 pages)
Dual 4k uhd hdmi and usb 2.0 extender over 1 cat6 to 100m/328ft with 3-port splitter sender and daisy-chain receiver (12 pages)
Summary of Contents for Hall Research Technologies EMX-DVI
Page 1
User’s Manual EMX-DVI Single & Dual Link DVI Extender w/ EDID Mgmt Equalizes and Boosts Single or Dual Link DVI video signals Manage EDID (pass-thru or emulate) Learns and Store EDID from any display USB Port for device management with included software...
Extender & EDID Mgr 1.0 Introduction Thank you for purchasing the Hall Research EMX-DVI. Use this device to boost and extend DVI video signals, emulate a display to the source by supporting EDID functions, and to be able to read/learn and emulate any display’s EDID.
Page 4
HDCP. All that is needed is the EMX-DVI in emulate mode connected at the video output of the Mac. The EMX-DVI provides a driver free USB port for connection to a PC. The package includes a universal power supply, a USB cable for connection to a PC, and a CD containing the User's Manual and Windows™...
If a power supply in deemed necessary, the package includes one that will plug to its USB port. When the EMX-DVI USB port is connected to a PC, it draws power from the USB and no additional power supply is needed.
Input, Output, and Top views 4.0 Default EMULATION resolutions The following is a list of supported resolutions in the internal EDID of the EMX-DVI as shipped from the factory – the native resolution is highlighted in grey. When the user “learns” a new EDID or uploads a new EDID to the box through the USB port, then this table is overwritten.
Extender & EDID Mgr 6.0 Operation The EMX-DVI recessed buttons prevent inadvertent changes to its settings. Changing the settings requires a pointed device inserted into the hole to depress the button. Some functions require depressing the button for several seconds.
EMX-DVI Extender & EDID Mgr 8.0 Troubleshooting Problem: No LEDs illuminate or LED’s only momentarily FLASH when buttons are pushed, or No video appears on the connected LCD Possible Cause: If connected via DVI input cable only, your source may not have...