Error Codes of Auto-equalizing Function
When correct measurement of car interior acoustic characteristics is not possible with the Auto-
equalizer, the following error messages are displayed. After checking, try again.
Error Check Mic
Error Check Speakers
Error Check System
Microphone is not connected.
The microphone cannot pick up
the measuring tone of the front
and rear speakers.
The surrounding noise level is too
high.
Plug in the supplied microphone securely
into the jack.
Confirm that the speakers are connected
correctly.
Set the input level setting of the power
amp connected to the speakers correctly.
Correctly set the microphone.
Stop your car in a place that's as quite as
possible, and switch off the engine and
air conditioner or heater.
Correctly set the microphone.