Disc Number Search; For 6-Disc, 12-Disc Types; Disc Number Rough Search; For 50-Disc Type Only - Pioneer DEH-P9100R Manual

Disc Number Search (for 6-Disc, 12-Disc types)
• When a 12-Disc Multi-CD Player is connected and you want to select disc 7 to 12, press the
1 to 6 buttons for 2 seconds.
Disc Number Rough Search (for 50-Disc type only)
This handy function lets you select discs loaded in a 50-Disc Multi-CD Player using the
1 to 5 buttons. The 50 discs are divided into five blocks, with each of the 1 to 5 buttons
assigned to a block.
• After completing a rough search, use the
• The Multi-CD player may perform a preparatory operation, such as verifying the presence of
a disc or reading disc information, when the power is turned ON or a new disc is selected for
playback. "READY" is displayed.
• When a magazine is loaded into a 50-Disc type Multi-CD Player, information on all the discs
in the magazine is read.
If you start playing a disc on a 50-Disc type Multi-CD Player before reading of information
on all discs has been completed, reading of information stops part way through. This will
prevent you from using the ITS function. (If you try and use this function, "Not Ready" is
displayed.)
If this happens, reading of information begins again when you switch to a component other
than the 50-Disc Type Multi-CD Player.
• If the Multi-CD player cannot operate properly, an error message such as "ERROR-14" is
displayed. Refer to the Multi-CD Player Owner's Manual.
• If there are no discs in the Multi-CD player magazine, "No Disc" is displayed.
• "LOADING" will be displayed in the following cases:
* If the disc in the extra tray is selected.
* If the disc is moved from the extra tray to the magazine.
(Refer to the 50-Disc Type Multi-CD Player Owner's Manual.)
• You cannot use the "Ejecting a Single Disc", "Frequency Play", "Music Group Play" or
"ABC Disc Title Search" functions with this product.
and buttons to select a desired disc.
%