Connection Diagram - Pioneer DEH-P9100R Manual

Basic Connection
Depending on the kind of vehicle, the
function of 3* and 5* may be different. In
this case, be sure to connect 2* to 5* and 4*
to 3*.
Cap (1*)
When not using this terminal,
do not remove the cap.
Yellow (3*)
Back-up
(or accessory)
Red (5*)
Accessory
(or back-up)
ISO connector
In some vehicles, the ISO connector may
be divided into two. If this is the case, be
sure to connect to both connectors.
Multi-CD player
(sold separately)
Connect leads of
the same color to
each other.
Yellow (2*)
To terminal always supplied
with power regardless of
ignition switch position.
Red (4*)
To electric terminal controlled
by ignition switch (12 V DC)
ON/OFF.
Orange
To lighting switch terminal.
Black (ground)
To vehicle (metal) body.
Speaker leads
White
White/black :Front left
Gray
Gray/black :Front right
Green
Green/black :Rear left
Violet
Violet/black :Rear right
See the section "RFP Alert
Installation".
White/yellow
Fuse holder
Fuse
resistor
Fuse
resistor
:Front left

Ã
:Front right


:Rear left or Not Used
Ã
 or Not Used
:Rear right or Subwoofer

or Subwoofer