About The Demo Mode; Reverse Demo; Feature Demo - Pioneer DEH-P9100R Manual

About the Demo Mode

This product features two demonstration modes. One is the Reverse Demo mode, the other is
the Feature Demo mode.

Reverse Demo

If you do not perform an operation within about 30 seconds, screen indications start to reverse,
and then continue reversing every 10 seconds. Pressing button 5 when power to this product is
switched OFF while the ignition switch is set to ACC or ON cancels the Reverse Demo mode.
Pressing button 5 again to start the Reverse Mode.

Feature Demo

The Feature Demo automatically starts when power to this product is switched OFF while the
ignition switch is set to ACC or ON. Pressing button 6 during Feature Demo operation cancels
the Feature Demo mode. Pressing button 6 again to start the Feature Mode. Remember that if
the Feature Demo continues operating when the car engine is switched OFF, it may drain
battery power.
• You cannot cancel a Demo mode when the front panel is open.
• The red lead (ACC) of this product should be connected to a terminal coupled with ignition switch
ON/OFF operations. If this is not done, the vehicle battery may be drained.