Non-Fading Output (Non Fad
When the Non-Fading Output setting is ON, the audio signal does not pass through this unit's
low pass filter (for the Subwoofer), but is output through the RCA output.
• When the Subwoofer Controller setting is only "Sub woofer control External", you can switch the
Non-Fading Output ON/OFF mode. (Refer to page 76.)
Non-Fading Output Level Adjustment (Non Fad
When the Non-Fading output is ON, you can adjust the level of Non-Fading output.
The display shows "0" – "–15".
• You can select the Non-Fading Output setting mode only when Non-Fading Output is switched ON
in the Non-Fading Output ON/OFF mode.
-1)
E
-2)
E