How To Replace Receiver - Fanimation Camview FP6225BL Owner's Manual

1. Remove the four screws in the housing. Retain the
four screws for installation Step 7. (Figure 1)
2. Carefully pull down the housing. Remove the four
screws in the motor assembly from the ceiling bracket
assembly. Retain the four screws for installation Step 6.
(Figure 2)
3. Hook the motor assembly onto the ceiling bracket
assembly. Now you can replace the receiver. (Figure 3)
4. Loosen the wire connectors of receiver. After replace
the new receiver, then operate the setting process again.
The connecting receiver wires as shown. (Figure 4)

How to Replace Receiver

14
Housing
Figure 1
Motor
Assembly
Housing
Figure 2
Hook
Figure 3
LISTED
OUTLET BOX
BLACK WIRE
FROM RECEIVER
TO MOTOR L
BLACK WIRE
FROM MOTOR
WHITE WIRE
FROM MOTOR
BLUE WIRE
FROM MOTOR
BLUE WIRE
FROM RECEIVER
FOR LIGHT
WHITE WIRE
FROM RECEIVER
TO MOTOR N
Figure 4
CEILING
CEILING
Ceiling Bracket
Assembly
Motor
Assembly
BLACK WIRE
FROM SUPPLY CEILING
GREEN WIRE(GROUND)
FROM HANGER BRACKET
GREEN WIRE(GROUND)
FROM SUPPLY
WHITE WIRE
FROM SUPPLY
BLACK WIRE
FROM RECEIVER AC IN L
GREEN WIRE(GROUND)
FROM WIRE TRAY
WHITE WIRE
FROM RECEIVER AC IN N
BLK-ANT