/ The Mavrik The Keoki ™ ™ Ceiling Fan The Keoki™ Fan FP4120** The Mavrik™ Fan FP6510** Net Weight of Fan Ass’y with Uplight Ass’y: 13.61 kg (30 lbs) Model No’s. FP4120 & FP6510 OWNER’S MANUAL READ AND SAVE THESE INSTRUCTIONS...
Fanimation. 7. Fanimation reserves the right to modify or discontinue any product at any time and may substitute any part under this warranty. 8. Under no circumstances may a fan be returned without prior authorization from Fanimation. The receipt of purchase must ac- company authorized returns and must be sent freight prepaid to Fanimation.
Fanimation. Substitution of parts or accessories not designated for use with this product by Fanimation could result in personal injury or property damage. Contact your retail store for missing or damaged parts.
Electrical and Structural Requirements Your new ceiling fan will require a grounded electrical supply line of 120 volts AC, 60 Hz, 15 amp circuit. The outlet box must be securely anchored and capable of withstanding a load of at least 50 lbs. Figure 1 depicts different structural configurations that may be used for mounting the outlet box.
Page 5
How to Assemble Your Ceiling Fan (cont’d) 6. Route wires through opening in Motor Coupling Cover. Position Motor Coupling Cover on fan shown with open side facing down. (Figure 2) 7. Route wires through opening in Canopy. Canopy on fan shown with open side facing up. (Figure 3) 8.
How to Hang Your Ceiling Fan ▲WARNING To avoid possible electrical shock, be sure electricity is turned off at the main fuse box before hanging. NOTE: If you are not sure if the outlet box is grounded, contact a licensed electrician for advice, as it must be grounded for safe operation.
How to Wire Your Ceiling Fan - C27 Wall Control NOTE: If fan or supply wires are different colors than indi- cated, have this unit installed by a qualified electrician. 1. Installing Wall Control (Figures 1 & 2): • With electrical power still disconnected, remove the existing wall plate and switch.
Installing the Canopy Housing NOTE: This step is applicable after the neccessary wiring is completed. (see page 7) ▲WARNING To avoid possible fire or shock, make sure that the electrical wires are completely inside the canopy housing and not pinched between the housing and the ceiling. 1.
Installing the Lower Housing Cover 1. Place flat washer on the inside of Lower Housing Cover (Figure 1). 2. Securely attach Lower Housing Cover by tightening Finial Nut supplied with the fan. Don’t overtighten. (Figure 2) 3. You have now completed the assembly of your ceiling fan.
For your own safety turn off power at fuse box or circuit breaker before trouble shooting your fan. Trouble 1. Fuse or circuit breaker blown. 2. Loose power line connections to the fan, or loose switch wire connections in the switch housing. 1.
Need help?
Do you have a question about the Keoki FP4120 Series and is the answer not in the manual?
Questions and answers