Confidential
DIsassembly Procedures
Use the steps below for disassembling the roll paper holder.
Reassembly
steps
Part names
Paper end assembly
(514)
Roll paper holder (1010)
Use the steps below for disassembling the roll paper guide
Reassembly
steps
Part names
NE lead wire set (1096)
Paper end assembly
(514)
Roll paper guide (1038)
Rev. B
Assembly procedures
Remove the paper end assembly (514).
When replacing the paper end assembly (514), you need to
pull out the wire attached on the HP circuit board. (See page
4-24.)
Remove 2 screws (S05), and remove the roll paper holder
plate (508).
Remove the roll paper holder (1010).
Assembly procedures
Remove the NE lead wire set (1096).
Remove the paper end assembly (514).
Turn the detector adjustment screw (1040), and remove the
NE detector assembly (1041) and the nut (1126). Then, remove
the roll paper guide (1038).
TM-U220 Type A Service Manual
.
Disassembly and Assembly 4-13