D-Link DCS-2100+ Manual page 71

Using IP Surveillance Software (continued)
Playback Program (continued)
Installation of the IP Surveillance software is detailed in an earlier
section of this manual titled Installation of IP Surveillance Software
under the main section titled Software Installation.
Logging-in
Before you start the Playback software program, it is necessary to login. For
security reasons, only the administrator account can login to Playback. To
change the password of the admin account refer to the section of this manual
titled Logging-In located in the main section Using IP Surveillance software.
After completing the installation of IP Surveillance, you can run the Playback
program from:
Start\Program Files\D-Link\IP Surveillance\Playback
or the directory you specified during the installation.
Status Area
The main window will be shown on the top of the screen and the display resolution
will change to 1024x768 automatically. There are four main areas in the window:
Display area, Histogram area, Control area, and Status area. There are
also three controls the Area selection indicator, the Frame selection
indicator, and the Pull bar. Explanations of the main Playback screen follow:
Area Selection Indicator
Display Area
Histogram Area
71
Control Area
Pull Bar Area