D-Link DCS-2100+ Manual page 61

Using IP Surveillance Software (continued)
Stop Monitoring a Channel:
To stop monitoring a video channel, you can drag and drop the video (in the
video area) to the trash can. To delete a channel:
1. Select the video display of the channel to be discarded.
2. Move the mouse cursor to the channel number.
3. Press and hold the left mouse button, the cursor will change if the
cursor is located in a droppable area.
4. Drag the cursor to the trash can and release the mouse button to
delete the channel.
Channel number
Droppable Areas
Moving Channels to Another Video Area:
The drag and drop procedure also applies to the moving or exchanging of video
channels. In the video area, if you want to exchange the videos of different
channels, you can drag the video and drop it where you want to locate the
video. If the destination video box is empty, then the video in the source video
box will be shown on the destination video box, and the source video box will
be empty. If the destination video box contains video of some channel, then
the videos in the source and destination video box will be exchanged.
10:36:13 AM
61