Using The Dcs-2100+ With The Internet Browser - D-Link DCS-2100+ Manual

Using the DCS-2100+ with an
Internet browser
If you are following this manual in the order it is presented, you should now have
an operating DCS-2100+ Internet Camera configured with the Installer program.
You also have installed the IP Surveillance software from the CD. This section
of the manual will deal with using the Internet Camera in two parts:
!
Using the DCS-2100+ with an Internet browser and accessing
the screens to control and monitor the camera.
!
Using IP Surveillance software with the DCS-2100+.
Open your Internet Explorer Web browser and enter the IP address for your
Internet Camera.
In the example, this address is 192.168.0.146. Your address may differ.
If a window appears
asking to install a
Verisign certificate
for authentication
Click Yes.
25