D-Link DCS-2100+ Manual page 39

Using the DCS-2100+ with an Internet browser
(continued)
Configuration > Advanced > Motion Detection
Click the Motion Detection button from the Configuration screen to access
settings that affect how the DCS-2100+ Internet Camera can serve as a security
device by recording only when motion is detected.
Click Motion Detection
Enable motion detection -
Window Name -
Sensitivity -
Percentage -
Note: Setting a higher sensitivity and a lower
percentage makes any motion more easily
detected.
http://192.168.0.146
Check this option to turn on the motion detection.
The text entered here will show at the top of the
window.
Sets the measurable difference between two
sequential images that would indicate motion.
Sets the amount of motion in the window being
monitored that is required to initiate a motion
detected alert.
39