D-Link DCS-2100+ Manual page 67

Using IP Surveillance Software (continued)
Current Year Settings And Camera Selector for the Recording function
By default, the scheduler is running with the
current date selected on the time-lines and
Date-time picker. Therefore, the current
scheduling year is the year that you run the
scheduler tool. To change the year setting:
Use the up (increase) and
down (decrease) arrows to
adjust the year setting.
The Date-time selector in
concurrently. If you change the year with the Date-time selector, the current
year setting will also be changed.
The following is the Camera selector:
Camera
Here you can make two kinds of schedules: a schedule associated with a specific
camera, or a general schedule that is not applied to a specific camera.
If you want to make a schedule that does not belong to any camera, select the
first row for editing.
If you want to create a schedule for a specific
camera, then click on the row of the camera you
wish to schedule. Select the Begin and End Times.
Add any other settings you wish to make. Click the
Add icon to save the changes.
Section 7 (see above) will change the year
67
2003
Add selected
Erase selected
period
period schedule
schedule