D-Link DCS-2100+ Manual page 60

Using IP Surveillance Software (continued)
Adding a Channel:
Adding a new camera as a channel can be accomplished with a simple drag
and drop procedure. After you have inserted the camera from the Camera
Configuration screen in the Function Menu, the channel number (shown
below) will change from grayed out to blue (see page 55 to Insert a camera):
1. Click on the number of the camera that was inserted previously:
2. Hold the mouse button down and drag the channel number onto a
droppable video area. The video from the new camera will be displayed
in this video display and the light above the camera number changes
from off to green.
Selected channel
to be viewed in the
video area
Recording
Connected & Monitoring
Configured channel
(but not connected)
Not configured channel
Recording button
60
Trash Can