Assembly Instructions - LeMond RevMaster Owner's Manual

Note: The handle on the adjustment lever has a
ratchet function. Once you have tightened
a lever, pull out on the handle and rotate it
so it does not stick out. Release the handle
to lock it into place.
Note: There is a pressure pad at the end of the adjustment lever that is held in place by shipping foam. The
foam is pushed out of the way when you slide the assembly onto the track. If the pad should come
loose, replace it before sliding the assembly onto the track.
Note: The left pedal is reverse-threaded.
12

ASSEMBLY INSTRUCTIONS

Pull Out and Rotate