Date/Time - Bosch D9412GV4 Owner's Manual

Control Panels
18.2

Date/Time

Your security system must have the correct time and
date for scheduled events to occur at the correct times.
Use the Date/Time function to set both the time and
date. The security system uses a 12-hour AM/PM format.
If your security system is configured for automatic date/
time updates, the update might overwrite your changes.
Setting the date and time:
1. Open the Main menu.
2. Press [Settings] to open the menu.
3. Press [Date/Time] to open the menu.
4. Press [Set Date] to open the menu.
5. Enter your passcode and press [ENTER].
6. Enter the new date in MM/DD/YY format.
7. Press [Save]/[ENTER] to save the change. The
keypad shows Date change complete and then
returns to the previous menu.
8. Press [Set Time] to open the menu.
9. Press [Set].
10. Enter the new time in HH:MM format.
11. For B93x, press [AM] or [PM].
12. Press [Save]/[ENTER] to save the change. The
keypad shows Time change complete and then
returns to the previous menu.
13. Escape from the menu.
Bosch Security Systems, Inc.
B94x/B93x Settings menu | en 101
2014.04 | 05 | F.01U.287.176