Input Source Selection (Computer 2: Rgb) - Eiki LC-XB43 Owner's Manual

Computer Input
Input Source Selection (Computer : RGB)
Direct Operation
Choose Computer  (RGB) by pressing the INPUT button on the top control or press the COMPUTER 2 button
on the remote control.
Remote Control
Menu Operation
1 Press the MENU button to display the On-Screen
Menu. Press the Point ▲
to Input and then press the Point
button.
Use the Point ▲

then press the SELECT button.
3
When Computer  is selected, analog RGB input
source will be selected directly.
Note:
When the Input Search function is set to On 1 or On  in
the Auto setup function, the input signal will be searched
automatically (p.47).
30
COMPUTER  button
Computer (RGB)
▼
buttons, move the highlight
►
or the SELECT
▼
buttons to select Computer  and
Top Control
INPUT button
Input Menu
Computer 1(RGB) /
(Component) / (Scart)
Computer (RGB)
Video
S-video
Auto
Auto