Eiki LC-XB43 Owner's Manual page 38

Computer Input
Custom
Adjust the screen scale and position manually with this
function.
Press the Point ► button at Custom and the Custom
adjustment menu is displayed on the screen, you can use
the Point ▲▼ buttons to choose the item you want to
adjust.
Scale H/V .......... Adjust the Horizontal/Vertical screen
scale.
H&V . .................. When set to On, the aspect ratio is
fixed. The Scale V appears dimmed and
becomes unavailable. Adjust Scale H,
then the screen scale is automatically
modified based on the aspect ratio.
Position H/V ..... Adjust the Horizontal/Vertical screen
position.
Common ........... Save the adjusted scale or position to all
the inputs. Press the SELECT button at
Common to display a confirmation box.
To save the scale or position, press the
SELECT button at yes. When Custom
is selected, the saved scale or position is
used.
Reset . ................ Reset the all adjusted values. Press
the SELECT button at Reset to display
a confirmation box. To reset, press the
SELECT button at yes.
For zooming in and out the images
Digital zoom +
Select Digital zoom +. The On-Screen Menu disappears and
D. zoom + appears. Press the SELECT button to expand the
image size. Use the Point
The Panning function can work only when the image is larger
than the screen size.
A projected image can be also expanded by pressing the
▲
D.ZOOM or the SELECT button on the remote control.
Digital zoom -
Select Digital zoom -. The On-Screen Menu disappears
and D . zoom - appears. Press the SELECT button to
compress image size.
The projected image can be also compressed by pressing
▼
the D.ZOOM or the SELECT button on the remote control.
To exit the Digital zoom +/– mode, press any button except
▲▼
the D.ZOOM and the SELECT buttons.
To return to the previous screen size, select a screen size
from the Screen Size Adjustment Menu or select an input
source from the Input Source Selection Menu (see pages
29-30) again, or adjust the screen size with the D.ZOOM
▲▼
buttons.
38
▲▼◄►
buttons to pan the image.
Note:
• When no signal is detected, Normal is set
automatically and the Aspect dialog box
disappears.
• The adjustable range for Scale H/V and
Position H/V is limited depending on the
input signal.
• The corner pattern mode is disable when in
Custom mode.
Remote Control
D .ZOOM ▲ button
D .ZOOM ▼ button
Note:
• The panning function may not operate
properly if the stored Mode in the PC
adjust Menu is used (p.34).
• The minimum compression ratio is limited
depending on the input signal, when the
Keystone function is working or when
Custom is selected for the screen size.
• True, Full, and Digital zoom +/– cannot
be selected when 480i, 55i, 480p, or
55p is selected in the PC System Menu
(p.31).
• Digital zoom +/- cannot be selected
when Full or True is selected.
POINT buttons
SELECT button