Top Control - Eiki LC-XB43 Owner's Manual

Top Control

① LAMP REPLACE indicator
Lights yellow when the projection lamp reaches its
end of life (pp.57,63).
② ON/STAND-By button
Turn the projector on or off (pp.19-21).
③ INPUT button
Select an input source (pp.29-30, 39-40).
④ KEySTONE button
Correct Standard (for Vertical/Horizontal
adjustment) or Corner keystone distortion (pp.25,
48).
⑤ POINT▲▼◄► (VOLUME +/-) buttons
– Select an item or adjust the value in the On-Screen
Menu (p.22).
– Pan the image in the Digital zoom + mode (p.38).
– Adjust the volume level (Point ◄► buttons) (p.26).
⑥ SELECT button
– Execute the selected item (p.22).
– Expand or compress the image in the Digital
zoom mode (p.38).
①
②
③
④
⑤
⑥
⑦ wARNING indicator
⑧ POwER indicator
⑨ AUTO SETUP button
⑩ MENU button
Part Names and Functions
⑦
⑧
⑨
⑩
– Lights red when the projector detects an abnormal
condition.
– Blinks red when the internal temperature of the
projector exceeds the operating range (pp.60, 71).
– Lights red when the projector is in stand-by mode.
– Lights green during operations.
– Blinks green in the Power management mode (p.52).
Execute the setting of Auto setup (includes
Input search, Auto PC adj. and Auto Keystone
functions) in the setting menu. (pp.24, 47).
Open or close the On-Screen Menu (p.22).
11