Computer Input; Input Source Selection (Computer 1: Rgb) - Eiki LC-XB43 Owner's Manual

Computer Input

Input Source Selection (Computer 1: RGB)

Direct Operation
Choose Computer 1(RGB) by pressing the INPUT button on the top control or press the COMPUTER 1 button
on the remote control.
Before using INPUT button, correct input source should be selected through Menu operation as described
below.
Remote Control
Menu Operation
1 Press the MENU button to display the On-Screen
Menu. Use the Point ▲
then press the Point
Use the Point ▲

When Computer 1 is selected, press the Point
3
access the submenu items. Use the Point ▲
to select the RGB input source and then press the
SELECT button.
Note:
When the Input Search function is set to On 1 or On  in
the Auto setup function, the input signal will be searched
automatically (p.47).
COMPUTER 1 button
Computer 1(RGB)
Computer 1(Scart)
▼
buttons to select Input and
►
or the SELECT button.
▼
buttons to select Computer 1.
Top Control
INPUT button
Input Menu
►
to
▼
buttons
Computer
1
Computer 1(RGB) /
(Component) / (Scart)
Computer (RGB)
Video
S-video
Auto
Auto
9