Rear Terminal - Eiki LC-XB43 Owner's Manual

Part Names and Functions

Rear Terminal

① CONTROL PORT
When controlling the projector with RS-232C,
connect the control equipment to this connector with
the serial control cable.
②
COMPUTER IN 1 / COMPONENT IN
Connect output signal from a computer, RGB scart
21-pin video output or component video output to
this terminal (pp.15,17).
③
MONITOR OUT
This terminal can be used to output the incoming
RGB signal from COMPUTER IN 1/COMPONENT
IN terminal or COMPUTER IN 2 to the other monitor
(pp.15,17).
④
COMPUTER IN 
Connect computer output to this terminal (p.15).
⑤
LAN Connection Terminal
Connect the LAN cable (refer to the owner's manual
of "Network Set-up and Operation").
⑥
S-VIDEO IN
Connect the S-VIDEO output signal from video
equipment to this jack (p.16).
10
① ②
⑨
⑩
③ ④
⑧ ⑦ ⑥
⑦ AUDIO OUT (VARIABLE)
Connect an external audio amplifier to this jack
(pp.15-17).
This terminal outputs sound from AUDIO IN
terminal (⑧ or ⑨).
⑧
COMPUTER 1 (COMPONENT) / COMPUTER
 AUDIO IN
Connect the audio output (stereo) from a
computer or video equipment connected to ②
or ④ to this jack (pp.15,17).
⑨
AUDIO IN
Connect the audio output signal from video
equipment connected to ⑥ or ⑩ to this jack.
For a mono audio signal (a single audio jack),
connect it to the L (MONO) jack (p.16).
⑩
VIDEO IN
Connect the composite video output signal to
this jack (p.16).
⑤