Auto Power-On - Alphasmart 3000 User Manual

(grounded) on the outside and positive in the middle. Full testing was
– (Negative) + (Positive)
9V DC 200mA
done with the AC adapter from AlphaSmart, Inc. and use with any
other AC adapter is not guaranteed. If damage occurs because of use
with another AC/DC adapter, repair is not covered under the warranty.

Auto Power-On

The AlphaSmart 3000 will power on automatically when connected via
USB to a powered-on AlphaHub, or via USB, PC Y cable, or Mac Y
cable to a powered-on computer, and will remain on until the cable is
disconnected or the AlphaHub or computer is turned off. When the
cable is disconnected or power is removed from the cable, the
AlphaSmart 3000 will return to the state it was in before connecting, i.e.
if it was off before connecting, it will turn off again when disconnected.
Note: This feature may not be available on older AlphaSmart 3000s.
18 Hardware Installation and Maintenance