Local Logon Setting On A Domain Controller - Fujitsu PRIMERGY RX200 S2 User Manual

3.2.2

Local Logon Setting on a Domain Controller

If Windows Server 2003 or Windows 2000 Server is used as a domain controller, it is necessary to set
the local logon rights to the user account with which you log on to GAM.
Configure the setting according to the following procedure.
Attempting to log on to GAM with a user account that does not have the local logon rights
will fail even if the user name and password are entered correctly.
1
Click [Start]
Controller Security Policy].
The [Domain Controller Security Policy] window appears.
2
Double-click [Security Settings].
3
Double-click [Local Policies].
4
Double-click [User Rights Assignment].
5
Double-click [Log on locally].
The [Security Policy Setting] window appears.
6
Click [Add].
7
Click [Browse].
8
Select the user account with which is to be logged on to GAM and
click [Add].
9
Click [OK].
10
Click [OK].
The [Add User or Group] window closes.
11
Click [OK].
The [Security Policy Setting] window closes.
12
Open [Command Prompt] and run the following command:
• For Windows Server 2003
• For Windows 2000 Server
24
→
[Programs]
C:\>gpupdate
C:\>secedit /refreshpolicy MACHINE_POLICY
→
[Administrative Tools]
→
[Domain