Settings; Server Group And Server Settings - Fujitsu PRIMERGY RX200 S2 User Manual

4.4

Settings

This section explains how to set parameters.
The following setting items are available:

• Server group and server settings

• Controller option settings
4.4.1 Server Group and Server Settings
The server group setting window automatically opens when GAM Client is started for the first
time.
Perform the following procedure to add a server group and servers. It is also possible to set a server
group by selecting [Define Server Groups] from the [Administration] menu.
1
Click [Add] button in the [Server Groups] area.
The [Adding Item] window appears.
2
Enter a name of the server group to be added.
Enter any name.
3
Click [OK].
The added server group name is displayed in the [Server Groups] area.
4
Select the server group added and click [Add] button in the
[Server] area.
The [Adding Item] window appears.
5
Enter the name or IP address of the server to be monitored.
6
Click [OK].
The entered server name or IP address will be added in the [Server] area.
7
Click [OK].
The [Define Server Groups] window closes.
Check that the registered server appears in [Global Status View].
Chapter 4 How to Use GAM 39