Coil Element Surface - Maytag MER5710 User Manual

Coil and radiant electric range
Hide thumbs Also See for MER5710:
Table of Contents

Advertisement

Surface
Cooking
(continued).............................
Surface Indicator Lights
Coil Elements
There is an indicator light under each pair of control knobs.
. When an element is turned on, it will cycle on and off
When one or both of the surface control knobs is turned on,
to maintain the heat setting.
the light will turn on. The light will turn off when the surface
0 Coil elements are self-cleaning.
element(s) is turned off.
.
Do not immerse in water.
Hot Surface Lights
To remove: When cool, raise element. Carefully pull oul
(glass-ceramic cooking surface
and away from receptacle.
modeloly
Each element has a HOT
SURFACE indica- _
uo_°rroS_gg_c%P _----_J°l
torlight, alightwill
_
/
j_//_
be illuminated when
_
JJ
the matching surface element
_
JJ
is hot. It will remain on, even after
_
To replace: Insert terminals on the element into receptacle.
the control is turned off, until the area has
Guide the element into place. Gently press down on the outer
cooled. They are located at the front center of the cooktop,
edge of the element until it sits level on the drip bowl.
Coil Element Surface
(select models)
i
TERMINALS
Lift-up Porcelain Cooktop
!i
l
To prevent the eooktop from discoloring or staining:
Drip Bowls
Clean cooktop after each use.
The drip bowls, located under each surface element, are
cooledWipe
acidas these°r
sugarspillsspillSmayaSdiscolorSOOn
as the cooktop has
designed to catch boilovers and must always be used. Ab-
or etch the
sence of these bowls during cooking may damage wiring or
porcelain.
other parts underneath the cooktop.
ill i _i
Yourrange features an upswept porcelain cooktop that can be
To prevent the risk of electric shock or fire, never line drip
lifted up for convenient access to the area under the cooktop,
bowls with aluminum foil.
To lift cooktop:
When cool, grasp the front edge of the
Drip bowls will discolor or craze over time, if overheated.
cooktop. Gently lift up until the two support rods at the front
of the cooktop snap into place.
This discoloration or crazing is permanent. However, it will
//_
not affect cooking performance.
-_
/_
To protect drip bowl finish:
° Avoid using high heat settings for long periods of time.
"_
SUPPORTROD
e
Do not use oversized cookware. Pans should not
_2 J [\
extend more than 1-2 inches beyond the element.
• When home canning, use the Canning Element (Model
To lower cooktop: Hold the front edge of the cooktop and
eel).
Contact your Maytag dealer for details.
carefully push back on each support rod to release. Then
• Clean frequently. (See cleaning section, page 17.)
gently lower the top into place. The support rods will slide
into the range frame.
9

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mer5530Mer5550Mer5750

Table of Contents