P2Mp Bridge Mode - Tenda W300A User Manual

300M Wireless-N Access Point

4.1.3 P2MP Bridge Mode

The P2MP Bridge Mode which connects scattered wired
network together is more complicated than P2P Bridge
mode. P2MP usually transmit wireless signals from one
access point, and other access points are in charge of
receiving signals so as to share network resource.
Support up to 4 remote access point connection. In
this mode, wireless clients are not allowed to connect.
4.1.3.1 Application and Network Topology
P2MP Bridge mode can connect multiple wireless
access point together without cabling. If "Root AP" is
configured as P2MP bridge mode, other (less than 4)
remote access points should select P2P bridge modes.
The topology shows below:
Note: In P2P Bridge and P2MP bridge mode,
38