Bridge (Wds) Mode - Tenda W301A User Manual

3.4 Bridge (WDS) Mode

Select "Setup Wizard" on the left menu and the working mode selection
interface will appear as the picture below.
Select Bridge (WDS) and then click "Next". You will enter the WDS setup
page as the picture below.
Bridge (WDS) working mode includes: Point to Point Bridge (WDS P2P),
Point to Multipoint Bridge (WDS P2MP), Wireless Repeater (Repeater).
Users can select the mode according to need. Please refer to Chapter
4.1.2 for detailed introduction.
Click "Enable Scan". AP will scan the available wireless device nearby
9