MAC Address 1
MAC Address 2
MAC Address 3
MAC Address 4
Open Scan
AP MAC address, select one and Click "Save"
to complete this part's setting. The AP will
reboot automatically, the setting will go into
effect.
Note: 1. in this mode, the two devices should
keep
encryption method.
2. AP-Security Setting can differentiate
with
encryption method and secrete key.
300M Wireless-N Access Point
Input AP1's MAC address;
:
Input AP2's MAC address;
:
Input AP3's MAC address;
:
Input AP4's MAC address;
:
Enable scan to obtain remote
:
the
same
WDS-Security
49
channel
and
setting
in