Tenda W300A User Manual page 59

Basic Data Rates from the drop-down menu. Here,
default value is (1-2-5.5-11Mbps...). It is
recommended not to modify the default value.
Beacon Interval

beacon, which is a packet broadcast by an AP to
synchronize a wireless network. The default value
is 100 ms.
Fragment

threshold defines the maximum transmission
packet size
fragmented if the arrival is bigger than the
threshold setting. The default size is 2346 bytes.
RTS Threshold

send". This parameter controls what size data
packet the frequency protocol issues to RTS
packet. If the device works in SOHO, do not
modify the default value.
TX Power：Set the wireless output power level.

The default value is 100.
WMM Capable

transfer performance (0n-line video and voice). If
you are not clear about this, enable it.
APSD Capable

service. The default is disabled.
300M Wireless-N Access Point
The frequency interval of the
：
Threshold
：
in bytes. The
RTS stands for "Request to
：
To enhance wireless multimedia
：
It is used for auto power-saved
：
55
The fragmentation
packet will be