Removing The Engine; Installing The Engine - Yamaha YFM50S Service Manual

1
1
1
2
4 - 4
ENGINE

REMOVING THE ENGINE

1. Remove:
• metal clamps
NOTE:
After removing the metal clamps, slide the dust
boot 1 towards the swingarm.
EBS00207

INSTALLING THE ENGINE

1. Install:
• dust boot 1
NOTE:
Before mounting the engine assembly, install
the dust boot onto the middle driven gear bear-
ing housing.
2. Install:
• upper engine mounting bolt/nut 1
• lower engine mounting bolt/nut 2
NOTE:
_
Do not fully tighten the bolts and nuts.
3. Tighten:
• upper engine mounting nut 1
33 Nm (3.3 m · kg, 24 ft · lb)
• lower engine mounting nut 2
33 Nm (3.3 m · kg, 24 ft · lb)
ENG