Disassemble Iris Module; Disassemble Scaler Board - Optoma HD80 Service Manual
Projection system
Hide thumbs
Also See for HD80:
- User manual (50 pages) ,
- Firmware upgrade document (4 pages) ,
- Specifications (2 pages)
Table of Contents
Advertisement
2-10 Disassemble IRIS
Moduel
1. Unscrew 2 screws on the IRIS module
2. Remove the IRIS module
2-11 Disassemble Scaler
Board
1. Unscrew 1 screw (as red circle�
2. Unplug 1 FPC cable (as yellow square�
3. Remove the scaler board
Note: The switch should be at "on"location when
assembling or replacing the scaler board. (the
same direction as red arrow point )
HD80/HD80-LV/HD803-LV Series
Confidential
2-6
Hide quick links:
Advertisement
Table of Contents
