Table of Contents
Advertisement
Table of Contents ................................................................................... 1
Usage Notice .......................................................................................... 2
Safety Information .........................................................................................2
Precautions ...................................................................................................3
Eye Safety Warnings .....................................................................................5
Introduction ............................................................................................ 6
Product Features ...........................................................................................6
Package Overview ........................................................................................7
Product Overview ..........................................................................................8
Main Unit ................................................................................................................ 8
Control Panel ......................................................................................................... 9
Connection Ports ................................................................................................. 10
Remote Control .................................................................................................... 11
Installation ............................................................................................ 12
Connecting the Projector .............................................................................12
Powering On/Off the Projector ....................................................................13
Powering On the Projector ................................................................................... 13
Powering Off the projector ................................................................................... 14
Warning Indicator ................................................................................................. 14
Adjusting the Projected Image ....................................................................15
Adjusting the Projector's Height ........................................................................... 15
Adjusting the Projector's Zoom / Focus ............................................................... 16
Adjusting Projected Image Size ........................................................................... 16
User Controls ....................................................................................... 17
On-screen Display Menus ...........................................................................20
How to operate .................................................................................................... 20
Menu Tree ............................................................................................................ 21
Image ................................................................................................................... 22
Display ................................................................................................................ 26
Setup .................................................................................................................... 29
System ................................................................................................................. 32
Appendices .......................................................................................... 36
Troubleshooting ...........................................................................................36
Image Problems .................................................................................................. 36
Intermission Problems ........................................................................................ 38
Projector Status Indication .................................................................................. 39
Remote Control Problems ................................................................................... 40
Replacing the Lamp ....................................................................................41
Compatibility Modes ....................................................................................42
RS232 Commands and Protocol Function List ...........................................43
Ceiling Mount Installation ............................................................................46
Optoma Global Offices ................................................................................47
Regulation & Safety notices ........................................................................49
Table of contents
1
Advertisement
Table of Contents
Related Manuals for Optoma HD8000-LV
Summary of Contents for Optoma HD8000-LV
-
Page 1: Table Of Contents
Projector Status Indication ... 39 Remote Control Problems ... 40 Replacing the Lamp ...41 Compatibility Modes ...42 RS232 Commands and Protocol Function List ...43 Ceiling Mount Installation ...46 Optoma Global Offices ...47 Regulation & Safety notices ...49 Table of contents... -
Page 2: Usage Notice
Do not attempt to service this projector yourself. Opening or removing covers may expose you to dangerous voltages or other hazards. Please call Optoma to be referred to an authorized service center near you. 8. Do not let objects or liquids enter the projector –as they may touch dangerous voltage points or short-out parts that could result in a fire or... -
Page 3: Precautions
Usage Notice Please follow all warnings, precautions and mainte- nance as recommended in this user’s guide. Do not look into the projector’s lens when the lamp is on. The bright light may hurt your eyes. To reduce the risk of fire or electric shock, do not expose this projector to rain or moisture. - Page 4 Usage Notice ▀■ ▀■ ▀■ ▀■ ▀■ ▀■ Turn off the product before cleaning. Use a soft cloth moistened with mild detergent to clean the display housing. Disconnect the power plug from AC outlet if the product is not being used for a long period of time. Do not: Block the slots and openings on the unit provided for ventila- tion.
-
Page 5: Eye Safety Warnings
Eye Safety Warnings ▀■ Avoid staring directly into the projector beam at all times. ▀■ Minimize standing facing into the beam. Keep your back to the beam as much as possible. ▀■ A stick or laser pointer is recommended to avoid the need for the user to enter the beam. -
Page 6: Introduction
Full function IR remote control with back light Advanced vertical digital keystone correction and high quality full screen image re-scaling User friendly control panel Optoma’s patent-pending O purification technology HDMI & DVI support HDCP function. HDMI(support HDMI 1.3) x2, DVI-I (support HDMI 1.1,... -
Page 7: Package Overview
Package Overview This projector comes with all the items shown below. Check to make sure your unit is complete. Contact your dealer immediately if anything is missing. Projector with lens cap RCA Component Cable for YPbPr 2.0m Available in European version only... -
Page 8: Product Overview
Introduction Product Overview Main Unit 1. Control Panel 2. Zoom Lever 3. Focus Ring 4. Elevator Button (one on each side) 5. Elevator Feet 6. Zoom Lens 7. IR Receivers 8. Connection Ports 9. Power Socket 10. Tilt-Adjustment Feet 11. Air exhaust vent... -
Page 9: Control Panel
Control Panel 1. Power and IR Receiver 2. Power Indicator LED 3. Lamp Indicator LED 4. Temp Indicator LED 5. Menu (On/Off) 6. Four Directional Select Keys 7. Source Select 8. Re-Sync 9. Enter Introduction... -
Page 10: Connection Ports
Introduction Connection Ports 1. +12V Relay Connector 2. Composite Video Input Connector 3. RS232 Input Connector 4. S-Video Input Connector 5. DVI-I Input Connector (PC Digital and DVI-HDCP) 6. HDMI 1 Connector 7. HDMI 2 Connector 8. Component Video Input Connector 9. -
Page 11: Remote Control
Remote Control 1. Power (On/Off) 2. Contrast 3. Gamma 4. Brite Mode 5. Image Shift 6. Enter 7. Four Directional Select Keys 8. Display Mode 9. Edge Mask 10. Brightness 11. Image AI 12. IRIS 13. Menu 14. Overscan 15. 4:3 16. -
Page 12: Installation
Installation Connecting the Projector SCART DVD Player +12V Relay Output Video Output DVD Player, Set-top Box, HDTV receiver 1..Power Cord 2..DVI to VGA Adaptor (For European Only) Due to the difference 3..RS232 Cable in applications for each 4. -
Page 13: Powering On/Off The Projector
3. Turn on the lamp by pressing “ ” button on the control panel. And the Power LED will turn blue. The startup screen will display in approximately 30 seconds. The first time you use the projector, you can select your preferred language from quick menu after the startup screen display. -
Page 14: Powering Off The Projector
Installation Powering Off the Projector 1. Press the “ ” button to turn off the projector lamp, you will see a message displayed on the projector’s screen. Press the “ ” button again to confirm, otherwise the mes- sage will disappear after 5 seconds. -
Page 15: Adjusting The Projected Image
Adjusting the Projected Image Adjusting the Projector’s Height The projector is equipped with elevator feet for adjusting the image height. To raise the image: 1. Press the elevator button 2. Raise the image to the desired height angle the button to lock the elevator feet into position. -
Page 16: Adjusting The Projector's Zoom / Focus
Turn the Zoom Lever to zoom in or zoom out. To focus the image, turn the focus ring until you see a clear image. The projector will focus at distances from 4.9 to 39.4 feet (1.5 to 12.0 meters) and the projection screen size from 0.775m~7.62m (30.5”~300”) at 16:9 mode with mechanical travel. -
Page 17: User Controls
Control Panel & Remote Control There are two ways for you to control the functions: Control Panel and Remote Control. Using the Control Panel Refer to the “Power On/Off the Projector” Power section on pages 13-14. Source Press “Source” to choose DVI, RGB, Com- ponent-p, Component-i, S-Video, Compos- ite Video, HDTV and HDMI sources. -
Page 18: Using The Remote Control
Four Direc- tional Select Keys Enter Overscan Refer to the “Power On/Off the Projector” section on pages 13-14. Adjust the brightness of the image. Control the degree of difference between the lightest and darkest parts of the picture. Switch the Image AI function ON/OFF. - Page 19 Scale the image at a 16:9 aspect ratio. 16:9 The input source will be displayed without Native scaling. Enable the viewing of the letterboxed non- Letter-Box anamorphically enhanced movie at full screen width. Part of the original image will be lost if the image aspect ratio is less than 2.35:1.
-
Page 20: On-Screen Display Menus
User Controls On-screen Display Menus The Projector has multilingual On-screen Display menus that allow you to make image adjustments and change a variety of settings. The projector will automatically detect the source. How to operate To open the OSD menu, press “Menu” on the Remote Control or Control Panel. -
Page 21: Menu Tree
IMAGE|Advanced Noise Reduction Ed g e Enhanc e B/W Extension Menu Tree Color Tem p 1 English IMAGE Bri g htness DISPLAY H Ima g e Shif t V Ima g e Shif t IMAGE|Advanced Noise Reduction V Ke y stone SETUP Ed g e Enhanc e 1 English... -
Page 22: Image
User Controls Mode There are many factory presets optimized for various types of im- ages. Cinema: For home theater. Bright: For the brightest possible image, Use if ambient light is present. “Image mode-->TV” TV: For watching analogue or digital TV images. ... - Page 23 User Controls Tint Adjusts the color balance of red and green. Press the to increase the amount of green in the image. Press the to increase the amount of red in the image. Sharpness Adjusts the sharpness of the image. Press the to decrease the sharpness.
-
Page 24: Noise Reduction
User Controls Noise Reduction The motion Adaptive Noise Reduction reduces the amount of vis- ible noise interlaced signals. The range is from “0” to “10”. (0:Off) Gamma This unit comes with 10 preset gamma curves. After the initial setup and fine tuning is completed, utilize the Gamma Adjustment steps to optimize your image output. -
Page 25: Color Temp
User Controls pre-set modes that allow the user to switch among the pre-sets to obtain different image effects. (0:Off/1:On) Color Temp. Adjust the color temperature. At cold temperature, the screen looks colder; at warm temperature, the screen looks warmer. 1) For User mode adjustment, put cursor on “User”, and press “Enter”... -
Page 26: Display
User Controls Format Use this function to choose your desired aspect ratio. 4:3: This format is for 4x3 input sources not enhanced for Wide- screen TV. 16:9: This format is for 16x9 input sources, like HDTV and DVD enhanced for Widescreen TV. - Page 27 LBX: This format is for non-16x9, letterbox source and for users who use external 16x9 lens to display 2.35:1 aspect ratio using full resolution. Detail informations about LBX mode : 1. Some Letter-Box DVDs are not enhanced for 16x9 TVs. In 2.
- Page 28 User Controls V Keystone Press the to adjust image distortion vertically and makes a squarer image.
-
Page 29: Setup
The projector will not search inputs that are de-selected. Source Lock When this function is turned off, the projector will search for other signals if the current input signal is lost. When this function is turned on, it will search for a specified connection port. -
Page 30: High Altitude
Choose “On” to turn on High Altitude mode. Operates the fans at full speed continuously to allow for proper high altitude cooling of the projector. Auto Power Off Sets the interval of power-off of the system, if there is no signal input. - Page 31 Hue : Adjusts the color balance of red and green. Press the to increase the amount of green in the image. Press the “IRE” only support increase the amount of red in the image. under NTSC signal. IRE : Adjusts measurement of composite video signals. ...
-
Page 32: System
Projection The factory default setting. When you select this function, the projector reverses the image so you can project behind a translucent screen. When you select this function, the projector turns the image upside down for ceiling-mounted projection. - Page 33 User Controls with the most dark details revealed, vivid and bright image performed all the way. Off: The dynamic image performance manager is on standby. IRIS The iris function adjusts the contrast optically by opening and closing the lens aperture. The iris can be switched between Off (Close) and On (Open).
- Page 34 User Controls 12V Trigger STD: When “STD” is selected, 12V Trigger will send 12V when projector turn on. LBX: When 12V trigger set as “LBX” -- 1. Format change to “LBX”,12V trigger port will send 12V. 2. Format is “4:3”, “16:9”, or “Native”, 12V trigger port won’t...
- Page 35 User Controls System| Lamp Setting Lamp Hour Displays the cumulative lamp operating time. Lamp Reminder Choose this function to show or to hide the warning message when the changing lamp message is displayed. The message will appear up 30 hours before suggested replacement of lamp. Brite Mode Choose “On”...
-
Page 36: Appendices
Check if the projection lamp has been securely installed. Please refer to the “Replacing the lamp” section. Make sure you have removed the lens cap and the projector is switched on. Partial, scrolling or incorrectly displayed image Press “Re-Sync”... - Page 37 2. Press the toggle output settings. Example: [Fn]+[F4] If you experience difficulty changing resolutions or your monitor freezes, restart all equipment including the projector. The screen of the Notebook or PowerBook computer is not displaying your presentation If you are using a Notebook PC: ...
-
Page 38: Intermission Problems
Make sure the projection screen is between the required dis- tance 4.9 to 39.4 feet (1.5 to 12.0 meters) from the projector. See page 16. The image is stretched when displaying 16:9 DVD title When you play anamorphic DVD or 16:9 DVD, the projector will show the best image in 16: 9 format on projector side. -
Page 39: Projector Status Indication
When the lamp reaches its end of life, it will burn out and may make a loud popping sound. If this happens, the projector will not turn on until the lamp module has been replaced. To replace the lamp, follow the procedures in the “Replacing the Lamp” section on page 41. -
Page 40: Remote Control Problems
±22.5°. Make sure there are not any obstructions between the remote con- trol and the projector. Move to within 6 m (20 ft) of the projector. Make sure batteries are inserted correctly. Make sure batteries are exhausted. If so, replace weak batteries in ... -
Page 41: Replacing The Lamp
Allow service center to change the lamp as soon as possible. Make sure it to cool down before the projector has been cooled down for at least 30 minutes before changing lamp! changing the lamp. Lamp Replacing Procedure: 1. -
Page 42: Compatibility Modes
Appendices Compatibility Modes Mode VESA SVGA VESA SVGA VESA SVGA VESA XGA VESA XGA VESA XGA VESA XGA VESA WXGA VESA WXGA VESA WXGA VESA WXGA VESA SXGA+ VESA UXGA * HD * HD * MAC MAC G4 MAC G4 Remark : “... -
Page 43: Rs232 Commands And Protocol Function List
RS232 Commands and Protocol Function List RS232 Pin Assignments Pin no. Name Appendices I/O (From Projector Side... -
Page 44: Rs232 Protocol Function List
Appendices RS232 Protocol Function List I nte rf ace: 9 wires RS-232C Baud Rate : 115200 D at a Bit : 8 Parit y: none Sto p Bi ts : 1 F lo w C on tr o l: none Vi ewed A s OKOKOKOKOK Address Cod e... - Page 45 F u n c t i o n D e s c r i pt i o n -- g Get Lamp Hour -- g Get Video Source -- g Get Lamp Status -- g Get Projector status AC K Default ACK Default ACK...
-
Page 46: Ceiling Mount Installation
Appendices Ceiling Mount Installation 1. To prevent damaging your projector, please use the ceil- ing mount package for installation. 2. If you wish to use a third party ceiling mount kit, please ensure the screws used to attached a mount to the projec- tor met the following specifications:... -
Page 47: Optoma Global Offices
Optoma Global Offices For service or support please contact your local office. 715 Sycamore Drive Milpitas, CA 95035, USA www.optomausa.com Canada 5630 Kennedy Road, Mississauga, ON, L4Z 2A9, Canada www.optoma.ca Europe 42 Caxton Way, The Watford Business Park Watford, Hertfordshire, WD18 8QZ, UK www.optoma.eu... - Page 48 Appendices Taiwan 231,台北縣新店市民權路108號5樓 R.O.C. 電話：+886-2-2218-2360 服務處：services@optoma.com.tw Hong Kong Unit A, 27/F Dragon Centre, 79 Wing Hong Street, Cheung Sha Wan Kowloon, Hong Kong Tel : +852-2396-8968 www.optoma.com.hk China 上海市长宁区凯旋路1205号5楼 邮编: 200052 www.optoma.com.cn Japan 東京都足立区綾瀬 3-25-18 オーエス本社ビル E-Mail: info@osscreen.com Korea WOOMI TECH.CO.,LTD.
-
Page 49: Regulation & Safety Notices
Regulation & safety notices This appendix lists the general notices of your Projector. FCC notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. -
Page 50: Operation Conditions
Appendices Operation conditions This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1.this device may not cause harmful interference, and 2.this device must accept any interference received, includ- Notice: Canadian users This Class B digital apparatus complies with Canadian ICES-003.