Download  Print this page

Optoma HD8000 Firmware Upgrade Document

Home theater projector
Hide thumbs
   

Advertisement

Firmware Upgrade Procedure
for the Optoma HD8000
Home Theater Projector
05.04.07

Advertisement

Table of Contents
loading

  Also See for Optoma HD8000

  Related Manuals for Optoma HD8000

  Summary of Contents for Optoma HD8000

  • Page 1 Firmware Upgrade Procedure for the Optoma HD8000 Home Theater Projector 05.04.07...
  • Page 2 Firmware Upgrade Procedure Optoma HD8000 Step 1 Power off the projector and disconnect all the cables. Do not plug in the power cord until told to later in one of the steps. Step 2 To download the firmware upgrade software, go to the HD8000 product page.
  • Page 3 “Flash”to execute the firmware upgrade Step 6 When the words “Waiting for target reset” appear on the screen, plug in the power cord to the HD8000. Step 7 While the firmware is upgrading, you will see the words “Downloading: Appcode.
  • Page 4 When the firmware upgrade program has completed, you will see the following displayed on the screen Step 9 Disconnect the RS-232 cable and the power cord. The HD8000 is now ready to be placed back in your home theater environment.