Optoma HD80 Service Manual page 58

5. Choose "Digital" and "Trans" in Read item.
Click "Read" button to check EDID
information.
6-6 DDC Key-In Procedure
(HDMI 2 Interface)
1. Setup Procedure
- Unplug DVI-HDMI adaptor, then plug into
HDMI2 port.
Note: Confirm JP3 is "Close" status.
2. Programming
- Key in the serial number into the barcode
blank space.
- In "Write Source Select" item, select
"Digital".
- Choose the port you're using.
- Click "Program" button.
HD80/HD80-LV/HD803-LV Series Confidential
"
6-8