Optoma HD80 Service Manual page 57

6-5 DDC Key-In Procedure
(HDMI 1 Interface)
1. Setup Procedure
- Unplug DVI-DVI cable from fixture
- Plug DVI cable into P3 of fixture,
connect DVI-HDMI adapter with DVI
cable and then plug DVI-HDMI
adapter into HD80 unit.
Note: Confirm JP3 is "Close" status.
2. Programming
- Key in the serial number into the barcode
blank space.
- In"Write Source Select"item, select
"Digital".
- Choose the port you're using.
- Click "Program" button.
3. When the message "Please change the
cable to Digital" is shown on the screen,
then click"OK" button.
Note: "Run"message will appear on the screen.
4. When the EDID program is finished, a
message "OK" will appear on the screen.
HD80/HD80-LV/HD803-LV Series Confidential
6-7