Optoma HD80 Service Manual page 54

4. Programming
- Key in the serial number into the
barcode blank space.
- In"Write Source Select"item,select
"Analog" and "Digital".
- Click "Program" button.
5. When the message "Please change the
cable to Analog" is shown on the screen,
click "OK" button.
6. "Run" message will appear on the screen.
7. When the message "Please change the
cable to Digital" is shown on the screen,
follow procedure 6-4.
HD80/HD80-LV/HD803-LV Series Confidential
"
"
6-4