Disassemble Av Module And Connector Board - Optoma EP750 Service Manual

EP750/755

4-2 Disassemble AV Module and Connector Board

1. Turn over Bottom Housing and remove four screws
Housing.
2. Unscrew two screws
Connector Module and remove two screws
Clamp. Take off Side Vent.
2 85.4A326.060
4-6 | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
of Label Connector Module to remove Label
(85.4A326.060)
Connector Cover Clamp
(85.0A323.050)
from Connector Cover
(85.0A323.050)
1
2 85.0A323.050
Bottom Housing
2 Side Vent
from Bottom
85.0A323.050