Pair Devices - Nokia N86 User Manual

Tip: You can access the files in the device or on the
memory card using a compatible accessory that
supports the File Transfer Profile Client service (for
example, a laptop computer).
A Bluetooth connection is disconnected automatically
after sending or receiving data. Only Nokia Ovi Suite and
some accessories such as headsets may maintain a
connection even if not actively used.

Pair devices

Select Menu Tools
>
Open the paired devices tab.
Before pairing, decide on your own passcode (1-16
digits), and agree with the user of the other device to use
the same code. Devices that do not have a user interface
have a fixed passcode. You need the passcode only when
you connect the devices for the first time. After pairing, it
is possible to authorise the connection. Pairing and
authorising the connection makes connecting quicker
and easier, as you do not have to accept the connection
between paired devices every time you establish a
connection.
The passcode for remote SIM access must have 16 digits.
In remote SIM mode you can use your device's SIM card
with compatible accessories.
© 2010 Nokia. All rights reserved.
Connectivity > Bluetooth.
>
When the wireless device is in the remote SIM mode, you
can only use a compatible connected accessory, such as a
car kit, to make or receive calls.
Your wireless device will not make any calls, except to the
emergency numbers programmed into your device, while
in this mode.
To make calls, you must first leave the remote SIM mode.
If the device has been locked, enter the lock code to unlock
it first.
1. Select Options New paired
>
starts to search for Bluetooth devices within range. If
you have sent data using Bluetooth connectivity
before, a list of the previous search results is displayed.
To search for more Bluetooth devices, select
devices.
2. Select the device with which you want to pair, and
enter the passcode. The same passcode must be
entered in the other device as well.
3. To make the connection between your device and the
other device automatic, select Yes. To confirm the
connection manually every time a connection attempt
is made, select No. After pairing, the device is saved to
the paired devices page.
To give a nickname to the paired device, select
Assign short name. The nickname is displayed in your
device.
device. The device
More
Options
>
55