Log; Packet Data; Recent Calls; Monitor All Communication Events - Nokia N86 User Manual

Log

The log stores information about the communication
history of the device. The device registers missed and
received calls only if the network supports these
functions, the device is switched on, and within the
network service area.

Recent calls

Select Menu Applications
>
To view missed, received, and dialled calls, select
calls, Received calls or
Tip: To open the dialled numbers list in the home
screen, press the call key.
Select Options and from the following:
Save to Contacts — Save the highlighted phone
●
number from a recent calls list to your contacts.
Clear list — Clear the selected recent calls list.
●
Delete — Clear a highlighted event in the selected list.
●
Log duration — Select the time how long the
●
communication information is saved in the log. If you
select No log, no information is saved in the log.

Call duration

Select Menu Applications
>
© 2010 Nokia. All rights reserved.
Log and Recent
>
Dialled numbers.
> Log.
To view the approximate duration of your last call, dialled
and received calls, select
Note: The actual invoice for calls and services from
your service provider may vary, depending on network
features, rounding off for billing, taxes, and so forth.

Packet data

Select Menu
calls.
You may be charged for your packet data connections by
Missed
the amount of data sent and received. To check the
amount of data sent or received during packet data
connections, select
received data.
To clear both sent and received information, select
Options Clear
>
clear the information.

Monitor all communication events

Select Menu
To open the general log where you can monitor all voice
calls, text messages, or data and wireless LAN connections
registered by the device, select the general log tab
. Subevents, such as a text message sent in more
than one part and packet data connections, are logged as
one communication event. Connections to your mailbox,
Call duration.
Applications > Log.
>
Packet data All sent
>
counters. You need the lock code to
Applications > Log.
>
dataor All
119