Nokia N86 User Manual page 41

White balance ( ) — Select the current lighting
●
condition. This allows the camera to reproduce colours
more accurately.
Exposure compensation
●
are shooting a dark subject against a very light
background, such as snow, adjust the exposure to +1
or +2 to compensate for the background brightness.
For light subjects against a dark background, use -1 or
-2.
Sharpness ( ) (image only) — Adjust the sharpness
●
of the image.
Contrast ( ) (image only) — Adjust the difference
●
between the lightest and darkest parts of the image.
Light sensitivity ( ) (image only) — Increase the
●
light sensitivity in low light conditions to avoid too
dark images.
The screen display changes to match the settings you
make.
The available settings vary depending on the selected
camera.
The setup settings are shooting-mode specific. Switching
between the modes does not reset the defined settings.
The setup settings return to the default settings when you
close the camera.
If you select a new scene, the colour and lighting settings
are replaced by the selected scene. You can change the
setup settings after selecting a scene if needed.
© 2010 Nokia. All rights reserved.
( ) (image only) — If you
Video settings
To change the main settings, in the video mode, select
Options Settings and from the following:
>
Video quality — Set the quality of the video clip.
●
Select Sharing, if you want to send the video clip using
a multimedia message. The clip is recorded with QCIF
resolution, in 3GPP format, and the size is limited to
300 kB (approximately 30 seconds). You may not be
able to send video clips saved in the MPEG-4 format in
a multimedia message.
Record location — To add GPS location coordinates
●
to each file, select On. Receiving the GPS signal may
take time or the signal may not be available.
Video stabilisation
●
camera shaking when recording a video.
Audio recording — Select whether to record sound.
●
Add to album — Add the recorded video clip to an
●
album in Photos.
Show captured video
●
of the recorded video clip after the recording stops. To
view the entire video clip, select
toolbar (main camera) or
camera).
Default video name
●
captured video clips.
Memory in use — Select where you want to store your
●
video clips.
— Reduce the effects of the
— Select to view the first frame
Play from the active
Options Play (secondary
>
— Enter the default name for
41