Nokia N86 User Manual page 149

Show call duration
●
the length of a call to be displayed during the call.
Summary after call
●
the length of a call to be displayed after the call.
Speed dial — Select On, and the numbers assigned to
●
the number keys (2 to 9) can be dialled by pressing and
holding the key. See " Speed dial a phone number
", p. 113.
Anykey answer — Select On, and you can answer an
●
incoming call by briefly pressing any keypad key,
except the power key, selection keys, zoom/volume
key, or capture key.
Line in use — This setting (network service) is shown
●
only if the SIM card supports two subscriber numbers,
that is, two phone lines. Select which phone line you
want to use for making calls and sending text
messages. Calls on both lines can be answered
irrespective of the selected line. If you select
have not subscribed to this network service, you are
not able to make calls. When line 2 is selected,
shown in the standby mode.
Line change — To prevent line selection (network
●
service), select Disable
To change this setting, you need the PIN2 code.
Call divert
Select Menu Tools
>
divert.
© 2010 Nokia. All rights reserved.
— Activate this setting if you want
— Activate this setting if you want
if supported by your SIM card.
Settings and Phone
>
Call divert allows you to divert incoming calls to your voice
mailbox or another phone number. For details, contact
your service provider.
To activate call divert, select Activate. To check whether
the option is active, select
Several diverting options can be active at the same time.
When all calls are diverted,
mode.
Call barring
Select Menu
barring.
Call barring (network service) allows you to restrict the
calls that you make or receive with the device. For
example, you can restrict all outgoing international calls
or incoming calls when you are abroad. To change the
Line 2 and
settings, you need the barring password from your
service provider.
is
Voice call barring
Select the desired barring option, and set it on
(Activate) or off (Deactivate), or check whether the
option is active
calls, including data calls.
Call
>
Check status.
is shown in the standby
Tools Settings and
> >
(Check status). Call barring affects all
Phone Call
>
149